Nutone central vacuum parts, builtin vacuums accessories

NutoneSales.com

Product Index

Shopping Cart Help

Ventilation

Household Help

Sound & Security

Intercom Overview

And a Bonus

Terms and Conditions

Bookmark This Page

Installation Components for Nutone Central Systems

VacPans - VacuSweep - Inlets - Rough-in Kits - PVC Parts

Typical System Diagram

How to install guide.

Back to Main Page

VacPans - CI365

A must for the kitchen, pantry, laundry room, bathrooms - any hard surface floor. Easily disposal of glass fragments, pet hair and crumbs - all the hard to pickup debris. Just activate the vacuum feature with light toe pressure and sweep up the mess.

Just activate the vacuum feature with light toe pressure and sweep up the mess.

VacPans $29.00 Qty:

Quick trim plate is designed for front-entry access. Can be shortened to 3-/2 or 3" on site. Overall 10-9/16" x 4"

Trim Plate - $3.45 Qty:


	Join your VacPans to the inside PVC Piping with flexible tubing and eliminate the need to precisely align the rigid plastic pipe with the inlet. Kit has 2 clamps and a 2" diameter x 36" Flex hose that is vinyl over steel wire, interwoven with nylon cord. Can be cut to any length.
	Flex-Connect Kit - $9.10 Qty:

VacuSweep - CI367
A short profile design allows VacuSweep to be installed in tight space areas or within a 2 x 4 stud wall. Wiring is connected in mere seconds with spring loaded connectors.

VacuSweep - $24.95

Qty:

Electrified Direct Connect Inlets

Compatible with CH615 and CH620 Hoses

CI390 and CI395

Electrified inlets make it a simple one-step operation to plug and go - with no extension cord to carry around. CI395 for Advantage Series

Operates on house wiring from molded power recepticle clips. The housing wire runs to the nearest outlet box.

For Standard Units $4.75 ea
Qty:

For Advantage Series $13.00 ea
Qty:

Rough-In Kit for both models.
$13.20 ea Qty:

CI358 Supervalves

Operates on standard house wiring.
Includes wall valve, rough-in plate with junction box and strain relief. UL Listed.

Supervalves $11.25 ea
Qty:

Advantage Series Inlets

Recommended for Nutone CV653, CV750 and CV850 Advantage Power Units

CI370 Series

An LED Indicator lets you know when system is powered. It also reminds you when it is time to change the power unit dirt bag. No extra wiring is required.
Uses direct-connect hoses.
Installs with 361 mounting bracket
or 395, 396-1 or 396-3 rough-in kits.
3-3/4" W x 3" H x 5/8" D

CI335 - Vertical Design
3-1/2" w x 5-3/16" H x 1/2" d
central vacuums

Installs with 329 mount or CI330RK or CI3303RK rough-in kits.

Qty:

CF361 Mounting for CI370 - $3.55 Qty:
Also need basic fitting 2005 below

Qty:

CF329 Mount - $2.09

Standard Inlets

360 SeriesStandard Inlets are automatic on/off with a flapper valve. Inlets can be installed in walls or floors.
3-3/4" x 3" H x 5/8" D.
Installs with 361 Mounting bracket
or 395, 396-1 or 396-3 rough-in kits.

$9.95 each
Qty:

Mounting Bracket 361 - $3.55 Qty:
Also need basic fitting 2005 below

330 & 398 SeriesAutomatic off/on inlets with snap-back protective covers.
3" x 5-3/16" x 1/2"
Installs with 329 mounting plate or CI3301RK or CI3303RK rough-in kits.

Styrene $4.99 each
Qty:

or Metal
Qty:

329 Mount - $2.69

All Inlets - Wiring!

All inlets require 376UL wire connecting to the power unit. When a hose is plugged into an inlet it closes a contact that signals the power unit to turn On. This is signal wiring; it is not 110 volt power wiring.
Generally it is taped to the PVC pipe as the most convenient way to route to the power unit.

100 foot UL Listed Roll of wire is $11.69 Qty:

500 foot UL Listed Roll of wire is $45.25 Qty:

ID	Rough-In and Pre-Installation Packages for Inlets	Each & Order
395	Inlet rough-in kit for 360 and CI370 Series Includes mounting bracket, 90 deg flange ell, blank cover plate, a 24" pc 2" PV tubing and 42" pc 18/2 wire taped to pvc tubing.	$14.65 Qty:
396-3	Rough-in kit for 3-Inlet install of 360 & CI370 Series inlets Includes (3) mounting brackets, (3) 90 deg flange ells, (1) 90 deg street Ells, (1) 45 deg street Ell, (1) 100 ft 18/2 UL wire, (6) nail plates, (1) solvent cement (6) 90 deg sweep Ells, (2) Tees, (3) 45 deg Ells and (6) Stop couplings.	$43.45 Qty:
3961	Rough-in kit to expand 396-3 above by 1 inlet Includes mounting bracket, 90 deg flange ell, 90 deg street Ells, 45 deg street Ell, (2) nail plates, 90 deg sweep Ell, 45 deg Ell and (2) stop couplings.	$13.25 Qty:
CI3303RK	Rough-in kit for 3-inlet installation for use with 330 and CI335 series inlets	$40.75 Qty:
CI3301RK	Rough-in kit for 1-inlet installation for use with 330 and CI335 series inlets	$11.25 Qty:
326N	Existing Home Inlet Kit Assists with installing a central system in tight areas where it is difficult to connect straight tubing and wall inlets. Includes 330 inlet and 8 inches of superflex tubing, 329 mounting plate, inlet frame and tubing guard.	$14.10 Qty:

Installation Kits - for Central Vacuum Units

What you get in the Install Kits below

	Qty 3 1 1 2 2 3 1 1 5 22' 1	One Outlet Kits Sweep 90 deg Ells Sweep 90 deg Ells Short 90 deg Ell 45 deg Ells Pipe Straps Stop Couplings Mounting Plate 118 ml PVC Glue Cable ties Wire Inlet Valve	Qty 9 2 3 6 6 6 3 1 8 65' 3	Three Outlet Kits Sweep 90 deg Ells Sweep 90 deg Ells Short 90 deg Ell 45 deg Ells Pipe Straps Stop Couplings Mounting Plate 118 ml PVC Glue Cable ties Wire Inlet Valve

	2050 Full Door Electrified Kit with rough-in & finish plate
	1 Inlet Valve Kit - $30.38 Qty:		3 Inlets Kit - $81.81 Qty:

	1750 Square Door Electrified Kit with rough-in & finish plate
	1 Inlet Valve Kit - $27.97 Qty:		3 Inlets Kit - $73.55 Qty:

	1500 Round Door Kit
	1 Inlet Valve Kit - $17.71 Qty:		3 Inlets Kit - $50.26 Qty:
	1041 Rough-In for each valve - $1.31 Qty:

	1700 Square Door Kit
	1 Inlet Valve Kit - $22.45 Qty:		3 Inlets Kit - $50.26 Qty:
	1041 Rough-In for each valve - $1.31 Qty:

	2000 Full Door Kit
	1 Inlet Valve Kit - $22.45 Qty:		3 Inlets Kit - $52.83 Qty:
	1041 Rough-In for each valve - $1.31 Qty:

Individual Installation Parts

Valves	ID	Description	Each	Order
	1750	Square Door Valve - Electrified	$10.56	Qty:
	Complete with rough-in and finish plate
	1500	Round Door Valve	$5.53	Qty:
		1041 Rough-In for valve	$1.31	Qty:

	2000	Full Door Valve	$5.53	Qty:
		1041 Rough-In for valve	$1.31	Qty:

	1700	Square Door Valve	$5.53	Qty:
		1041 Rough-In for valve	$1.31	Qty:

	1041	Mounting Plate/Rough-In for new or finished homes	$1.31	Qty:
	1600	Trim Plate - if you cut the hole too large	$1.56	Qty:


PVC Pipe
	380-8	PVC 2" OD Pipe, 8 ft lengths Each piece is $4.65 Ship cost is significant for pipe
	3808 Short	PVC 2" OD Pipe, 4' 11" lengths 8 pieces in a package - $24.19 Eliminates oversize shipping charges. ( 8" under 40 feet total ) Join lengths with coupling 2010	$24.19/pack
		Join PVC pipes with Coupling 2010 $0.54 each Qty:

Basic 8 Fittings

	2001 Sweep 90 deg Ell	$1.15 Qty:	2002 Sweep 90 deg Spigot	$0.92 Qty:
	2003 Sweep 90 deg Tee	$1.99 Qty:	2004 Short 90 deg Ell	$0.98 Qty:
	2005 Flanged 90 deg Ell (Required with CF361)	$1.25 Qty:	2006 Flanged Tee	$1.98 Qty:
	2008 45 deg Ell	$0.98 Qty:	2009 45 deg Spigot	$1.15 Qty:
Specialty Fittings
	2030 30 deg Ell	$1.79 Qty:	2033 Short Tee	$0.91 Qty:
	2035 Slip Coupling	$1.50 Qty:	2045 45 deg Double Wye	$1.66 Qty:
	2046 45 deg Wye	$1.99 Qty:	2091 Medium 90 deg Ell	$1.15 Qty:
	2099 3-way 90 deg Ell	$3.90 Qty:
Other Fittings
	2020 12" Exhaust Vacuum Muffler	$5.58 Qty:	2017 Pipe Strap	$0.75 Qty:
	2029 High-Frequency Intake Muffler	$9.89 Qty:	3030 Exhaust Vent Cap	$2.90 Qty:

Shipping cost are estimated - you will be charged only Actual Shipping Cost + $2 pack/box.

NutoneSales.com by Tri-County Consultants, Inc.

Products & Parts - Call Mon-Fri 8:00 AM - 5:00 PM PST

Toll Free 866-368-8663
E-Mail Us Terms and Conditions